' Version number
' 01/02/08 Ver 1
' - Initial release
Version = 1
'
' BedMode
' Bit0 = In 4wd mode true, else 2wd mode
' Bit1 = Controller is Master (front) true, else Slave (rear)
' Bit2 = Is a 4wd dyno true, else 2wd
' Bit3 = Reserved
' Bit4 = Reserved
' Bit5 = Reserved
' Bit6 = Reserved
' Bit7 = Reserved
' Bits 8 to 15 = Transmission type
' 	0x00xx = Unknown
' 	0x01xx = 2wd
' 	0x02xx = 4wd locked
' 	0x03xx = 4wd Center diff
' 	0x04xx = 4wd Ceter Viscous
' 	0x05xx = 4wd Computer dog clutch
' 	0x06xx = 4wd Traction stability 1
' 	0x07xx = 4wd Front Viscous
BedMode = $0102
'
' Config bits
' Bit0 = Right hand mode true, else left hand mode
' Bit1 = Display charging screen true, else run mode
' Bit2 - Velocity is in RPM true, else in kph/mph
ConfigBits = $0001
'
'------------------------------------------------------------------------------
' PDA Variables
'------------------------------------------------------------------------------
'
' Max speeds
'
CHS_MaxSpeed_kph = 200
CHS_MaxSpeed_mph = 124
CHS_MaxSpeed_rpm = 20000
'
MYC_MaxSpeed_kph = 320
MYC_MaxSpeed_mph = 199
MYC_MaxSpeed_rpm = 20000
'
ENG_MaxSpeed_kph = 200
ENG_MaxSpeed_mph = 124
ENG_MaxSpeed_rpm = 5000
'
' Roller diameters
'
CHS_RollerDiameter = 218
MYC_RollerDiameter = 405
ENG_RollerDiameter = 1000
'